Forklift Battery Safe Installation and Charging
Lift truck batteries are pretty large and are extremely costly pieces of machinery. They weigh thousands of pounds. The task of charging and installing these batteries is something which will have to be really planned out ahead of time in order to make sure that these methods could be done safely and correctly. Maintaining proper handling and a sound charging procedure could really increase the battery's standard life span.
Standard Charging
It is suggested that the battery is not connected to the charger until it is at or less than 20% capacity. By charging the battery when it is more than 20%, the battery's lifespan could actually be shortened. On approximately every 5th charge cycle, the charger must be set on the equalize or weekend setting, depending on which kind of charger you are using.
The charging cycle should never be interrupted. As soon as the charge cycle is done, you must avoid utilizing the battery for some hours. By practicing these procedures, you can help make sure that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off prior to hooking up the battery to the charger. You then can connect the charger to the battery. This is a common mistake that can accidentally cause damage to both the charger and the forklift. In addition, it is very essential that the battery amperage must match that of the charger.
The battery should never be allowed to to deep discharge or to completely discharge. This would ultimately shorten the lift of the battery and can even prevent the charger from being able to activate. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician must be called in order to re-set the charger prior to charge being able to start.